|
Who's Online
There currently are 5593 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Good qulity. Even as it is an old manual (from 1991-1992) it has a good scanned quality and is complete, including user's manual, disassembly intructions, diagrams and schematics, ajustments, troubleshooting and parts list, as usual with SONY manuals and Owner-manuals service.
;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
7. Overall Noise Level Check Mode Recording and playback Signal Measurement Point Measuring Instrument Specified Value No signal: Audio terminal left and right of AUDIO/VIDEO INPUT jack AUDIO OUT jack LEFT or RIGHT Audio level meter Below �45dBs (IHF-A filter ON, 20kHz LPF ON)
8. Overall Separation Check Mode Recording and playback Signal No signal: Audio terminal <left> [right] of AUDIO/VIDEO INPUT jack 400Hz, �7.5dBs signal: Audio terminal <right> [left] of AUDIO/ VIDEO INPUT jack AUDIO OUT jack <LEFT> [RIGHT] Audio level meter Below �40dBs
Measurement Point Measuring Instrument Specified Value < > : Left channel check [ ] : Right channel check
Checking Method: 1) Connect the audio terminal left of AUDIO/VIDEO INPUT jack and its ground terminal with a jumper wire. 2) Connect the audio terminal right of AUDIO/VIDEO INPUT jack and its ground terminal with a jumper wire. 3) Record the signal. 4) Playback the recorded section. 5) Check that the noise level is the specified value. 6) Remove the jumper wires.
Checking Method: 1) Connect the audio terminal <left> [right] of AUDIO/VIDEO INPUT jack and its ground terminal with a jumper wire. 2) Input the 400Hz, �7.5dBs signal in the audio terminal <right> [left] of AUDIO/VIDEO INPUT jack. 3) Record the signal. 4) Playback the recorded section. 5) Check that the signal level of the AUDIO OUT <LEFT> [RIGHT] jack is the specified value. 6) Remove the jumper wires.
5-33
|
|
|
> |
|